Cutting machines
CA 900 - Band knife cutting machine, suitable for cutting a wide variety of materials. The machine is equipped with an air-table and electronic speed regulator. Available in 220 or 380 V.
CD 10 - Hot cloth drill, with thermo-statical controlled needle heating incl. water level.
TM 170 - Double headed trimming system for removing threads from garments. This machine is supplied with two trimming heads, which are connected to a vacuum system by 2m long hoses. The vacuum system has a quick release of mast for emptying the waste bag. Loose threads are drawn into the trimming mouth by suction, then neatly cut when the head is passed over the garment, leaving a clean and presentable product.
VK Series - Highly advanced vertical knife cutting machines, exclusively made for the Global Selection. The VK Series are equipped with automatic running belt knifesharpeners and a disconnect security switch on the handlegrip. A frontprotection cover must be installed to fulfil the conditionsof the CE-norms. This cover is included.VK 1106 - knife length 6"VK 1108 - knife length 8"VK 1110 - knife length 10"
Global All Star 100 - round knife
All Star 100 - Small circular round knife with blade dimension of 50 mm.
Global MB 90 - round knife cutting machine with blade dimension of 100 mm.
Maxdo YJ 100 - Round knife cutting machine with blade dimension 100 mm.
Maxdo YJ-65 - Round knife cutting machine with blade dimension of 65 mm.
ST-360 H - Manual lay-end cutter. Max. fabric width: 2,20 m. Max. table top width: 2,30 m. Max. lay depth: 300 mm. Knife size: 1000 mm. Voltage: 220 V, 1 ph, 50 / 60 Hz. Table is not included.
FA-200 H - Same as above, but automatic lay-end cutter. Table is not included. Other sizes are possible upon request.
