Welcome to IMCA bv - HO HSING website

 

Click here to see:

- features
- dimensions
- functions
- comparison with HVP-60
- operating panels



Back

 
Features:
1 One shot positioning
2 Highly accurate positioning ± 3°
3 Powerful operation box: parameters programmable,
linkable to PC, built in EEPROM can manage and
store the parameter setting
4 Solenoid over current protection
5 Low noise, low vibration and low power consumption
6 Linkable to PC
7 Software / hardware 2-way protection system
8 Multi positioning mode
9 Switching power supply system (160 ~ 280 V AC)
10 Powerful parameter system, easy adjustment and
upgradeable



Functions HVP-90-4-11
Motor type 550 W - 3000 rpm
750 W. - 2000 rpm
Power voltage range Single Phase:100-120V/200~240V
Available pulley size 65-130mm
(Standard:100mm)
One shot positioning √
Needle Up / down √
Slow Start √
Presser Foot Lifter √
Trimmer & Wiper √
Automatic Back tacking √
Reverse at Stop √
Power Transistor Protection √
Power Module Protection √
Input Signal Port 13
Solenoid Signal Output Port 8
Edge Sensor Input Port 2
Gross Weight 11.5 kgs
Packing Dimension

L x W x H = 424 x 409 x 355 mm.


HVP-90 compared with HVP-60
Category

HVP-90

HVP-60
Motor

550 W.

550 W.

Control
box

Similar exterior
7-segment display, LED bright and clear LCD display no light
Connector panel and main board are
separated. Easy to change.		 Connector panel and main board are
together. Difficult to change.
Switching power supply system Traditional power supply system
New type intelligent module Regular type IGBT module
Linkable to pc Function not available
One shot positioning Function not available
Operation
box		 C-60M (mini-DIN) C-300M (mini-DIN) C-300 (15 pins Molex)
Parameter setting Not available Function not available
Back light Not available Function not available
Linkable to PC Linkable to PC Function not available
Synchroniser

Synchroniser is the same


All-In-One Model

If you want a motor that matches various brands of sewing machines including
Lockstitch and Interlockstitch, the universal type HVP-90-4-11 is a good choice.

Dimensions



Operating panels

C-300M

Features C-300M:
- Stitches are clearly displayed on the LCD
- Start / end backtacking stitches can be set to 1 ~ 15
- Pattern sewing can be set to 1 ~ 99 stitches
- C-300M for standard mounting
- C-300MB1 for Brother built in mounting



C-60M

Features C-60M:
- Stitches are clearly displayed on the LCD
- Start / end backtacking stitches can be set to 1 ~ 15
- Pattern sewing can be set to 1 ~ 99 stitches
- LCD back light
- Parameter setting is available
- Linkable to PC
- Counter / Timer function
- Built in EEPROM, to save and back up your parameter settings