HVP60


	- features - dimensions - functions Back
Features: 1. Powerful functions & abundant parameters inside 2. Compatible with computer operation system 3. Self-Diagnostic Function 4. Solenoid over current protector 5. Only one circuit board inside 6. Programming multi position available 7. Adopt switching power supply system 8. Highly positioning, low noise ( less then 50% in compare with HVP60 ) 9. Net weight less then 6kgs

Functions	HVP-70
Motor type	AC Servo mini Motor / AC
Controller type	Full Function
Power voltage range	Single Phase:100-120V
	Single Phase:200-240V
	Three Phase:200-240V
Motor output	500W, 5000 rpm
	750 W, 3500 rpm
	750 W, 2500 rpm
Available pulley size	55-85 mm (Standard:75mm)
Needle Up / down	yes
Slow Start	yes
Presser Foot Lifter	yes
Trimmer & Wiper	yes
Automatic Backtacking	yes
Turn Back Stop	yes
Power Transistor Protection	yes
Power Module Protection	yes
Input Signal Port	13
Solenoid Signal Output Port	12
Edge Sensor Input Port	2
Gross Weight	500 W / 9.9 kgs - 750 W / 10.9 kgs
Packing Dimension	L x W x H = 400 x 350 x 320

All-In-One Model

If you want to stock only one type motor and be able to match various
brands of machines including Lockstitch and Interlockstitch, a
universal type HVP-70-4-11 would be a good choice.

Customer's Solution

- Air vacuum and edge sensor functions for Overlock or Interlockstitch
machines are available.
- Model for electronic Bartacking or Botton Hole machine is ready.
- Special timing match is always negotiable.

Dimensions